The garage serves as extra living space for many families, acting as a workshop, washing room, and even recreational area. If you spend a lot of time in your garage, an uncoated concrete floor isn’t a good choice for your aesthetic preferences. Coating the floor makes it more durable, simplifies maintenance, and enhances a property’s beauty and resale value.
In recent years, epoxy has emerged as the coating of choice for garage floors throughout the country. It may be applied on your own, or you can hire one of the many coating experts that provide competitive rates. People have asked us about polyaspartic floor coating and if it is preferable to the widely used epoxy finish. The quick answer is? Yes.
Although polyaspartic coatings have been on the market for approximately 20 years, they have only just begun to gain traction in garages. Typically, this material is applied as coatings for ships and railcars, as well as bridges and piers. Polyaspartic has comparable properties to polyurethane, but it cures more quickly than urethanes and epoxies and may be used in a much wider temperature range.
Comparison of Polyurea and Polyaspartic for a Garage Floor Coating
Polyaspartics have chemical changes that make them more adaptable, resilient, and easy to apply to your garage floor. Polyurea coatings are just as long-lasting as epoxy ones, but they cure quickly. Due to this, they are not ideal for do-it-yourself installations.
Polyaspartic Garage Floor Coating: How Long Does it Take to Cure?
Polyaspartic coatings cure more quickly than epoxy coatings, but at a rate that allows you to work with them. Polyaspartics producers have developed products with a cure time that is slow enough for simple application yet fast enough to enable floor traffic in a short amount of time by adjusting the ester composition.
Two hours after application, a polyaspartic-coated floor is ready for pedestrian traffic, and 24 hours after application, it is ready for vehicular traffic. On the other hand, epoxy-coated floors have to sit idle for at least 12 hours before they can handle foot traffic and another 72 hours before they can handle vehicle traffic.
In What Kinds of Settings are Polyaspartic Floor Coatings Most Useful?
If you’re planning on using a concrete base with a resinous coating, then polyaspartic coatings are a good option. It’s a common substitute for epoxy paints and coatings. In addition to garages and other buildings designed to house vehicles, these coatings can be found in storage facilities, medical facilities, laboratories, commercial establishments, and pretty much anywhere else a uniform, easily cleaned, highly durable surface is required.
Can Polyaspartic Floor Coatings be Applied in Low Temperatures?
Yes! Applying the coating is possible even when the temperature is well below freezing. Once the surface has hardened, it will not be affected by temperatures below freezing.
Additional Information About Polyaspartic Garage Floor Coating
The price of polyaspartic coatings is typically 20% higher than that of epoxies. Polyaspartics are available in gallon sizes from certain retailers.
Polyaspartic coatings are superior to epoxy coatings in their resistance to ultraviolet light and ability to maintain their original color. Furthermore, they are not easily marked by hot tires, making them ideal for use in a garage.
Polyaspartic coatings can be used as a finish coat over epoxy because of their low viscosity, which is more akin to water than paint. Visit Garage Floor Coating of Nashville today if you’re looking for the best concrete finishing options for your garage, home, or basement.
Comments are closed.